1、厦门专业防水http://xmfangshui.hbugo.com/提醒应该先关闭漏水管道的阀门，暂时停止漏水。打磨除锈漏水点，清洗干净用吹风机吹干。
Jinan professional waterproof remind should first close the valve leaking pipes, temporarily stopped leaking. Polished rust leakage points, cleaned with a hair dryer.
2、找5毫米厚的一块废橡胶块，并且单面用粗砂纸打磨一遍。分别在漏水处和打磨过的橡胶面上涂胶水。
Looking for a 5 mm thick waste rubber blocks, and again sided with coarse sandpaper. Respectively leaks and polished rubber surface coating of water.
3、待胶水不粘手，将橡胶块贴到漏水处，用橡胶锤或木棒敲击橡胶块使之紧紧粘牢。用金属卡箍将橡胶块紧紧的箍在水管上。
Be sticky glue, rubber blocks attached to leaks, tapping rubber block with a rubber mallet or stick closely to make cement. The rubber block with a metal clamp on the pipe tightly hoop.
4、厦门专业防水http://xmfangshui.hbugo.com/介绍用木块压在橡胶块上用铁丝紧紧的绑在水管上。金属卡环在卖橡胶管道的地方可以买到，拧螺丝的那种，水压不大的情况下，一定能够保证不再漏水。
Jinan professional waterproof description is pressed on the rubber block of wood with wire tightly tied to the pipes. Metal clasp on sale where you can buy a rubber pipe, tighten that screw, under pressure is not the case, we can ensure that no leakage.
